BREMBO Prime 09.C505.33 Disque de frein appropriées pour ALFA ROMEO GIULIA, STELVIO 360x32mm, 5, perforé/ventilé de l'intérieur, disque de frein à deux pièces, Pot de disque de frein en aluminium

BREMBO Prime Brake Disc 09.C505.33 – High-performance perforated/vented two-part disc for Alfa Romeo Giulia and Stelvio

The BREMBO Prime Brake Disc 09.C505.33 represents the pinnacle of Italian braking technology – engineered for enthusiasts who demand exceptional performance, precision and reliability. Manufactured by BREMBO, the world's leading brake system specialist and OEM supplier to premium automotive brands, this high-performance perforated/vented brake disc delivers superior braking force and outstanding heat dissipation under the most demanding driving conditions. Technical specifications include an outer diameter of 360.0 mm, a disc thickness of 32.0 mm and features advanced two-part construction.

The 09.C505.33 BREMBO Prime brake disc features a sophisticated perforated/vented design with 5 mounting holes and incorporates an innovative aluminium brake disc hub. The two-part construction combines a cast iron friction ring with a lightweight aluminium bell, reducing unsprung weight while maintaining structural integrity. Made from premium materials with advanced metallurgy, it comes with BREMBO's signature finish and is engineered to exceed OEM specifications for Alfa Romeo's high-performance vehicles.

Which vehicles are compatible with the BREMBO 09.C505.33?

For which Alfa Romeo models is the BREMBO Prime 09.C505.33 brake disc suitable?

This brake disc is compatible with the following Alfa Romeo models: Giulia 952 (2015–present) including Quadrifoglio variants, and Stelvio 949 (2017–present) including Quadrifoglio variants. The disc is specifically designed for high-performance applications and track-focused driving.

Installation instructions for BREMBO Prime 09.C505.33

1. Replace brake discs in pairs to ensure balanced braking performance and maintain vehicle stability.

2. Remove the wheels and carefully remove the brake caliper. Support the caliper securely to prevent stress on the brake lines.

3. Remove the old disc: carefully loosen the retaining screws. For two-part discs, handle with extra care due to the aluminium hub construction.

4. Thoroughly clean the hub surface from any rust, dirt or debris before installing the new disc, paying special attention to the mounting surface.

5. Install the new BREMBO disc and high-performance brake pads, then tighten all fasteners to manufacturer specifications using a torque wrench.

6. After installation, pump the brake pedal several times to seat the pads and check brake fluid level in the reservoir.

7. Bedding-in: perform 8–12 controlled braking cycles from 100 to 40 km/h with cooling intervals to properly condition the friction surfaces.

FAQ: BREMBO Prime Brake Disc 09.C505.33

Do the brake pads need to be replaced at the same time as the BREMBO brake disc 09.C505.33?

Yes, it is essential to replace brake pads when installing new BREMBO Prime discs. High-performance discs require compatible high-performance pads to achieve optimal braking performance and prevent premature wear.

Is the BREMBO brake disc 09.C505.33 ventilated or solid?

This brake disc is perforated/vented with advanced internal cooling channels. The sophisticated venting design combined with cross-drilled holes provides exceptional heat dissipation, crucial for high-performance Alfa Romeo applications.

What are the advantages of the two-part brake disc design in the BREMBO Prime 09.C505.33?

The two-part construction with aluminium brake disc hub reduces unsprung weight by approximately 15-20% compared to conventional discs, improving handling response, acceleration, and fuel efficiency while maintaining superior braking performance.

How should new brake discs be properly bedded in?

During the first 300 km, perform progressive braking cycles and avoid emergency stops. For track use, complete a proper bedding procedure with controlled high-speed stops to develop the optimal friction layer between pads and discs.

What is the outer diameter and thickness of this brake disc?

The Brake disc BREMBO 09.C505.33 has an outer diameter of 360 mm and thickness of 32 mm – specifically engineered for high-performance Alfa Romeo Giulia and Stelvio models requiring maximum braking capability.

Is this brake disc suitable for vehicles with ABS?

Yes, the BREMBO Prime 09.C505.33 is compatible with ABS, ESC, and all advanced driver assistance systems. The disc maintains precise tolerances required for proper sensor operation and electronic brake management.

Do I need special tools to install the BREMBO brake disc 09.C505.33?

Standard brake service tools are sufficient, but a calibrated torque wrench is essential for proper installation. Due to the two-part construction and aluminium hub, follow BREMBO's specific torque specifications to prevent damage.

What are the advantages of the BREMBO brake disc 09.C505.33 compared to other models?

The Prime series offers superior heat management through advanced venting and perforation, reduced weight via aluminium hub construction, enhanced durability through premium materials, and optimized performance specifically for Alfa Romeo's high-performance vehicles.

Can the BREMBO Prime disc be used for track driving?

Absolutely. The Prime Brake Disc BREMBO 09.C505.33 is engineered for both street and track use, featuring advanced cooling technology and materials specifically designed to handle the extreme thermal demands of circuit driving.

How long do BREMBO Prime brake discs typically last?

Lifespan varies based on driving style and conditions. For normal driving, expect 60,000-80,000 km. For performance driving or track use, inspect regularly and replace when approaching minimum thickness specifications or showing signs of excessive wear.